Boca SoundExpression 14.4VSP, Руководство пользователя

Страница: 42 / 96

42
SoundExpression
Resolving Hardware Conflicts
This section describes the possible hardware conflicts between your
SE1440 and other adapter cards in your system, and ways of resolving
these conflicts.
Hardware conflicts occur when two or more devices use the same I/O
address, IRQ, or DMA channel. The default settings of the SE1440 are as
follows:
Sound Blaster Mode
DMA = 1
IO Address = 220H
IRQ = 5
These settings might come into conflict with other devices, such as
scanners, printers, or a SCSI hard disk drive, for example.
To resolve hardware conflicts:
1. Find out the current board setting (DMA channel, IRQ, I/O port
address) of the SE1440 by running “CSACDIA1”, from the C:\SE1440
directory (or other directory where you installed the SE1440 drivers).
2. If you know of any peripheral card in your system that is using the
same setting, change the hardware setting on the peripheral card or the
SE1440.