Boca Systems PRO/6 Скачать руководство пользователя страница 62

Страница: 62 / 84

BOCA PRO16

Appendix G: Regulatory Statements

FCC Statement:

This device complies with part 15 of the FCC rules. Operation is
subject to the following two conditions:

(1) This device may not cause harmful interference.
(2) This device must accept any interference received including
interference that may cause undesired operation.

THIS UNIT COMPLIES WITH FCC PART 68 AS OF DATE OF
MANUFACTURE.

This equipment has been tested and found to comply with the limits

for a Class B digital device, pursuant to Part 15 of FCC rules. These

limits are designed to provide reasonable protection against harmful

interference in a residential installation. This equipment generates,

uses, and can radiate radio frequency energy and, if not installed in

accordance with the instructions, may cause harmful interference to

radio communications. However, there is no guarantee that

interference will not occur in a particular installation. If this

equipment does cause harmful interference to radio or television

reception, which can be determined by turning the equipment off and

on, the user is encouraged to try to correct the interference by one or

more of the following measures:

• Re-orient or relocate the receiving antennae.

• Increase the separation between the equipment and the receiver.

• Connect the equipment into an outlet on a circuit different from that

to which the receiver is connected.

• Consult the dealer or an experienced radio/TV technician for help.

Note: This unit was tested with shielded cables on the peripheral

devices. Shielded cables must be used with the unit to insure

compliance.

Note: The manufacturer is not responsible for any radio or TV

interference caused by unauthorized modifications to this equipment.

Such modifications could void the user’s authority to operate the

equipment.

Содержание PRO/6





















































































Результаты поиска

Содержание PRO/6

Отзывы:

Похожие инструкции для PRO/6

Бренды по названию

Популярные бренды

Boca Systems PRO/6, Руководство по установке

Результаты поиска

Содержание PRO/6

Отзывы:

Похожие инструкции для PRO/6

Бренды по названию

Популярные бренды