Boca Systems PRO/6, Руководство по установке

Страница: 54 / 84

54
BOCA PRO16
Using DTR to Dial
You may commence dialing by having your computer raise its
DTR signal.
• Connect your modem to a personal computer.
• Run a communications program and enter “local mode” or
“terminal mode”
• Type: AT&Z0=phoneno and press ENTER
Where “phoneno” is the telephone number you want your
modem to dial. This stores the number as stored telephone
number zero.
NOTE: If you are using your modem over leased lines, do not
store a phone number.
• Type: AT&D2&M4 and press ENTER
or:
Type: AT&D2&M2 and press ENTER
Issue the &M4 command if you wish to use asynchronous
communications; issue &M2 if you wish to use synchronous
communications.
• Type: AT&Wn and press ENTER
The modem set up is saved to profile n=0-3
• Place front panel Option switch 4 in the Down position (select
Dumb mode)
• If necessary, use the Mode button to select the required
communication speed