manualshive.com logo in svg

Boca Systems BEN1PI, Руководство по установке

Поделиться
Скачать
Boca Systems BEN1PI Скачать руководство пользователя страница 8

8

BOCALANcard-PCI

Driver Installation

It will be necessary to install drivers after you’ve inserted
the Ethernet adapter into your system. Drivers for the
more popular network operating systems are included on
the device driver diskette which came with this package.

These drivers are standard implementations for their
respective systems. If you have any difficulty installing
the drivers, then refer to Section Three: Driver Installation
for particular instructions for your system. Also refer to
the README files on the device driver diskette. There is
one README file in the root directory, as well as one in
each product-specific directory. Review these files for the
latest information about drivers and installation
instructions.

Novell Compatibility

Boca Research Ethernet adapters are hardware compatible
with the NE2100 and NE1500T. Check if your network
operating system has drivers for the NE2100 or NE1500T
included with it and use these drivers if they are newer
than those on the Boca diskette. Be sure to use the
NE2100 or NE1500T drivers and not NE2000 drivers.

Troubleshooting

If the adapter does not function after you have installed it
with the necessary software, be sure the adapter is seated
firmly and that you have set all options correctly. If you
still have difficulty, refer to Section Four: Troubleshooting.

Содержание BEN1PI





































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды