Boca Systems BEN1PI, Руководство по установке

Страница: 35 / 68

35
3. Boot NetWare by executing SERVER.EXE. Refer to
NetWare documentation on loading disk drivers and
mounting volumes.
4. To load the driver manually, simply follow the
instructions given below.
Type the following command at the file server console:
LOAD BOCANW
<ENTER>
This file should be installed from the Boca diskette.
(You will need to specify DOS path if the driver is located
in a DOS partition).
Then, bind the driver to the IPX protocol stack by typing:
BIND IPX TO BOCANW NET=xxxx <enter>
(Bind to ipx or any other protocol stack).
5. You may also add the following two lines to the
AUTOEXEC.NCF:
LOAD BOCANW
BIND IPX TO BOCANW NET=xxxx
Driver Configuration and Installation