Boca Systems BEN1PI, Руководство по установке

Страница: 27 / 68

27
3. Boot NetWare by executing SERVER.EXE. Refer to
NetWare documentation on loading disk drivers and
mounting volumes.
4. To load the driver manually, simply follow the
instructions given below.
Type the following command at the file server console:
LOAD BOCANW <ENTER>
(You will need to specify DOS path if the driver is located
in the root directory on the DOS partition). Do not use
INT keywords. The BOCALANcard-PCI requires no
keywords to be specified for interrupt channel.
Make sure that MSM and ETHERTSM files are present in
the same directory as BOCANW. The BOCANW driver
will autoload these files. These files should be copied from
the diskette from the 4.x subdirectory under the Novell
directory. Then, bind the driver to the IPX protocol stack
by typing:
BIND IPX TO BOCANW NET=xxxx <enter>
(Bind to ipx or any other protocol stack).
Driver Configuration and Installation