Boca Systems BEN1PI, Руководство по установке

Страница: 7 / 68

7
Quick Start (for Experienced Users)
This section is intended for knowledgeable and
experienced network installers who will be using the
default settings.
Hardware Installation
The default settings for the adapter are as follows:
PCI Interrupt A
REDLED Receive activity
If you need to change any of the default settings, refer to
Section Two for instructions. Otherwise, insert the adapter
into a PCI-Bus compatible slot. There are normally three
PCI expansion slots, depending on your system. PCI
(Peripheral Component Interconnect) is a new standard in
motherboard configurations. Using a 32/64-bit bus and
BIOS-configurable adapter cards, a PCI motherboard
promotes conflict-free expansion.
NOTE: If your particular PCI motherboard comes
with a “slave” PCI slot, do NOT insert the board
into that slot. It will not work. The board must be
inserted into a “master” slot.
The PCI BIOS communicates with PCI adapter cards and
dynamically configures each card during installation. The
BOCALANcard-PCI does not allow end-user selection of
DMA, IRQ, or port addresses. This is done using the PCI
standard.
Quickstart