BOC Edwards EXT555H, Инструкция по эксплуатации

Страница: 36 / 44

Issue A Jun 01
PAGE
30
EXT555H
SERVI
C
E, SPARES AN
D
ACCESSORIES
30
7.4.3 Pump-to-controller cable
You must fit a pump-to-controller cable between an
EXC Controller and the EXT pump. A cable is not
supplied with the EXT Pump or the EXC Controller
(except EXC250L). The following cables are
available:
Cable Length Item Number
Pump-to-controller 1 m D396-18-010
Pump-to-controller 3 m D396-18-030
Pump-to-controller 5 m D396-18-050
Table 13 - Pump-to-controller cable
7.4.4 EXDC drive modules
Fit an EXDC Drive Module as an alternative to an
EXC Controller and pump-to-controller cable.
Drive module Item Number
EXDC160 D396-41-000
Table 14 - EXDC drive modules
7.4.5 BX bakeout band (conflat only)
A BX bakeout band accelerates the degassing of the
pump to enable it to achieve lower pressures. It may
also be used to protect the pump from
condensation of contaminants. The bakeout bands
are available in 110-120 V or 220-240 V versions and
may be powered from a rear panel socket on the
EXC Controller.
Pump Bakeout band Item Number
EXT555H/Hi DN160CF BX501 (110 V) B580-52-044
BX501 (240 V) B580-52-064
Table 15 - BX bakeout band