BobsCNC RP9, Руководство по сборке

Страница: 5 / 45

5
1. Place the bearings into the rectangular slots of the extruder mount.
2. Wrap the 2 bearings by inserting large nylon ties through the side opposite of the
bearing into the slotted holes of the extruder mount. The slots on one side are larger to
make room for nylon ties during a later step.
3 Pull the bearing snug against the extruder mount (use pliers if needed).
4. Cut off the excess of the nylon tie.
For a clean look and string clearance, insert the nylon straps first in the inboard
holes.