Bobrick AirCraft B-701 Скачать руководство пользователя страница 25 | Manualshive

Страница: 25 / 66

Bobrick AirCraft B-701 Скачать руководство пользователя страница 25

Page 19

INSTALLATION INSTRUCTIONS BOBRICK SURFACE-

MOUNTED HAND AND HAIR DRYERS

ELECTRICAL CHARACTERISTICS.

115V AC, 20 Amp, 50/60 Hz, Single Phase, cULus listed 208

–240V AC, 9–10 Amp, 50/60

Hz, Single Phase, cULus listed, VDE approved, CE marked, and CCC approved.

REMOVAL OF COVER

Start installation of dryer by removing cover. To loosen two cover bolts insert Allen Wrench,
provided with dryer, into holes located on bottom of cover on each side of air intake grille.
Make sure wrench fits into head of cover bolts and turn CLOCKWISE until bolts stop
turning. When cover bolts are screwed in all the way, cover can be removed.
To remove cover, place a hand on each side of cover and push up toward top of dryer
releasing cover from studs at top of mounting base. Lift cover off mounting base by pulling
forward at the bottom and upward at the same time.

INSTALLATION OF MOUNTING BASE.

An Installation Template is supplied with each unit.

RECOMMENDED MOUNTING HEIGHTS.

Distance from floor to bottom mounting screw holes of mounting base (Dimension A).

Hand dryer.

Men’s Washrooms  .................................................................  46'' (117cm)
Women’s Washrooms  ...........................................................  44'' (112cm)
Children’s Washrooms, ages 3-9  ..........................................  32'' (81cm)
Children’s Washrooms, ages 9-12  ........................................  36'' (91cm)
Children’s Washrooms, ages 12-15  ......................................  40'' (102cm)
Children’s Washrooms, ages 15-18  ......................................  44'' (112cm)
For Wheelchair Access  .........................................................  38'' (97cm)

«
...
23
24
25
26
27
...
»

Содержание AirCraft B-701



































































Отзывы:

Нет отзывов