| 6 |
BN Products-USA
www.bnproducts.com
• Check for blockages in the cooling air inlet and around the control
unit.
• If any blockages are found, remove them.
• After checking, restart the engine
Tip: The overload indicator light may come on for a few seconds when us-
ing electric devices that require a large starting current, such as a compres-
sor or a submersible pump. This is normal and not a malfunction.
AC Pilot Light (Green)
The AC pilot light comes on when the engine starts and produces power.
Engine Smart Control (ECO)
“ON”
When the ECO switch is turned to “ON,” this feature controls the engine speed
according to the connected load. The results are better fuel consumption and
less noise.
“OFF”
When the ECO switch is turned “OFF,” the engine runs at the rated/min (3600r/
min) regardless of whether it is connected to a load.
Tip: The ECO must be turned to “OFF” when using electric devices that re-
quire a large starting current, such as a compressor or a submersible pump.
