| 11 |
BN Products-USA
www.bnproducts.com
STARTING THE ENGINE
Recoil Starter
• Unplug all appliances from the generator.
• Turn the fuel valve to the full “ON” position. This activates the choke
• If the unit is already warm, turn the fuel valve to the mid “ON” position
• Turn the generator switch to the “ON” position.
• Pull the starter grip until compression is felt, then pull briskly.
• Turn the fuel valve to the mid “ON” position after the engine is warm.
Electric starting
• Unplug all appliances from the generator.
• Turn the fuel valve to the full “ON” position. This activates the choke
• Turn the fuel valve to the mid “ON” position if the unit is already
warm.
• Press the start button.
• After starting the engine, immediately release the start switch.
• Turn the fuel valve to the mid “ON” position after the engine is warm.
• If the starter is sluggish or fails to start the generator, the battery may
require charging. Starting the generator with the pull cord and allowing
it to run will charge the battery.
Electric Start with Remote
• Hold down the start button for 3 seconds to start the generator.
• Hold down the stop button for 3 seconds to shut the generator down.
Programming a new remote.
• Press and hold the “match” button on the generator’s front panel.
• While holding the “match” button, press and hold the start button on
the remote until the engine light flashes three times.
• Let go of both buttons and start the generator by holding the start
button.
Stopping the Engine
• Turn the AC circuit breaker to the “OFF” position.
• Turn the generator switch to the “OFF” position.
• Turn the fuel valve to the “OFF” position.
