BMW Communication System WCS-1
44
Operation
Operation with two WCS-1
helmets
Once you have paired the
WCS-1 helmets and want to
use them, switch on WCS-1 in
both helmets by pressing and
holding down the "
Select On/
Off
" multifunction button.
Then briefly press the "
Select
On/Off
" button on each of the
WCS-1 helmets.
As soon as either helmet wear-
er speaks for the first time, the
WCS-1 switches automatically
to connect mode.
Note
If the connection is broken be-
cause the helmets are out of
range (more than 10 metres
apart), the WCS-1 helmets au-
tomatically return to the con-
nect mode when they are again
in range of each other.
Operation with WCS-1
helmet and Bluetooth mobile
phone
Switch on WCS-1 in the helmet
and switch on the mobile
phone.
Make sure that the mobile
phone is switched on and that
its Bluetooth function is active.
Briefly press the "
Select On/
Off
" multifunction button on the
WCS-1 helmet.
A Bluetooth connection be-
tween the WCS-1 helmet and
the mobile phone is set up in
response to a call.
Note
Depending on the make of mo-
bile phone, you may have to set
up the Bluetooth connection
again by briefly pressing the
"
Select On/Off
" multifunction
button a second time.
If the connection is interrupted
because the two devices are
out of range (more than 10 me-
tres apart), you have to press
the "
Select On/Off
" multifunc-
tion button briefly once the de-
vices are back within range of
BA_Helmkommsys_WCS1.book Seite 44 Dienstag, 22. Februar 2005 2:32 14
Содержание WCS-1
Страница 28: ...BMW Communication System WCS 1 56...
