BMW WCS-1, Руководство пользователя

Страница: 13 / 28


BMW Communication System WCS-1
41
Pairing a WCS-1 helmet and
a mobile phone (headset
profile)
•
Make sure that the mobile
phone is switched on and
that its Bluetooth function is
active.
•
Consult the instructions for
use supplied by the manu-
facturer of the mobile phone
if you require assistance.
•
Switch on WCS-1 in the hel-
met by pressing and holding
down (> 2 seconds) the
"
Select On/Off " multifunc-
tion button on the plastic-foil
keypad.
•
The green LED flashes very
rapidly (setup mode).
•
Briefly press the " + " button
on the WCS-1 helmet: this
helmet is now visible to
the mobile phone for
30 seconds.
•
The green LED flashes rapid-
ly (pairing mode).
•
The mobile phone must look
for the WCS-1 helmet as an
audio accessory (headset).
•
The mobile phone recognis-
es the WCS-1 helmet as a
Bluetooth device.
•
The WCS-1 helmet appears
as Bluetooth device "
BMW/
WCS-1/FW:x.x " on the mo-
bile phone's display.
•
Key " 0000 " into the mobile
phone as the code for
pairing.
•
Once the WCS-1 helmet has
been recognised by the mo-
bile phone, it functions as the
phone's headset.
•
The WCS-1 helmet changes
to setup mode after 30 sec-
onds and the green LED
flashes very rapidly.
Pairing and function check
BA_Helmkommsys_WCS1.book Seite 41 Dienstag, 22. Februar 2005 2:32 14