Important instructions on the installation of the Sound Module System
Only for use within the BMW trading organisation.
Installation of the Sound Module System may only be carried out by a specialist workshop
which has available the necessary special tools and the required manuals (maintenance,
repair, diagnostic, etc.).
This high-quality audio system is for use only in combination with an original BMW
car radio!
If connected to a non-BMW make, BMW AG will accept absolutely no responsibility
under the guarantee for the Sound Module System.
The Sound Module System should only be installed in vehicles which are not equipped
with the BMW Hi-Fi system orTop Hi-Fi system.
Sound Module System II may only be fitted in combination with the Sound Module
System I retrofit/installation kit no. 82 83 0 022 121.
Care should be taken when installing cables/leads that these do not become kinked or
damaged.
Additionally installed cables/leads must be fastened with cable straps.
Item numbers relate only to the overviews or to the text by the side of the illustration
which is associated with it.
Customer information should be handed over to the customer.
The right is reserved to make changes.
Required tools and auxiliary materials
Set of 1/4 inch socket-wrenches
Set of Phillips screwdrivers
Crimping pliers
Hand lamp
Set of flat-tip screwdrivers
Side cutters
Set of TORX wrenches
Universal pliers
Set of drills
Drilling machine
Textile adhesive tape
Sealing compound
EN/31
Retrofit/Installation Kit no. 82 83 0 022 122 Date: 04.2000
Installation Instructions no. 01 29 0 022 772