EN/55
Retrofit/Installation Kit no. 82 83 0 022 122 Date: 04.2000
Installation Instructions no. 01 29 0 022 772
Install ground cable (40), cable colour brown,
with cable lug ø6mm to ground point
X13016
and screw it on.
Combine the excess length of the adapter cable
(4) into the form of a figure of eight and fasten it
with cable ties in the side part at rear left.
9.
Install amplifier and supplementary wiring harness
(only vehicles with on-board monitor radio and battery in the boot)
30
4
40
X13016
F 46 0748 B
4
43
44
41
40
42
F 46 0749 B
Connect together the black 17-pole on-board
monitor radio connector (40) of the on-board
monitor radio wiring harness (41) with the black
17-pole pin housing (42) of the adapter cable (4).
Change the plug-in assignment of the
connection cable for the video module and,
if necessary, that of the connection cable of
the CD changer in the black 17-pole socket
housing (43) of the adapter cable (4).
Connect the black 17-pole socket housing (43)
of the adapter cable (4) to the on-board monitor
radio (44).
Install power cable (40) from amplifier (1) along
the audio wiring harness to the installation
location of the battery (41).
40
41
1
F 46 0755 B
40
8
41
42
17
16
F 46 0756 B
Install power cable (40), cable colour red, to
connection point and cut off excessive length.
Crimp on blade terminal contact (17) to the
power cable (40) and insert at the supply line
with fuse (8).
Screw cable lug ø8mm (41) coming from the
supply line with fuse (8) to the positive terminal
of the battery.
Then fasten supply line with fuse (8) to the
positive cable (42) and power cable (40) with
cable straps (16).