BMW M3 2001, Руководство пользователя

Страница: 63 / 183

63 n
Index
Data
Technology
Repairs
Car care
Controls
Overview
Starting the engine Switching off engine Parking brake
If the engine does not start on the first
attempt (if the engine is very hot or
cold, for instance):
>
Press the accelerator pedal halfway
down while engaging the starter.
Cold starts at very low temperatures,
starting at about +5
7
(–15
6
) and
at high altitudes over 3,300 ft
(1,000 meters):
>
On the first start attempt, engage the
starter for a longer period (approx.
10 seconds)
>
Press the accelerator pedal halfway
down while engaging the starter.
Engine idle speed is controlled by the
engine computer system. Increased
speeds at startup are normal and
should decrease as the engine warms
up. If engine speed does not decrease,
service is required.
To prevent the battery from
discharging, always deactivate elec-
trical devices that are not in use. Switch
the ignition off when the vehicle is not
being driven.
Turn the ignition key to position 1 or 0.
Do not remove the ignition key
while the vehicle is still moving. If
you do so, the steering will lock, making
it impossible to steer the vehicle.
When you leave the vehicle, always
remove the ignition key and engage
the steering lock.
Set the parking brake when parking on
steep hills, because under certain
conditions, putting the vehicle into first
gear or reverse may not be enough to
prevent it from rolling away.
The power assist is not available when
the engine is not on. This means that
more effort is required to apply the
brakes.
<
The parking brake is primarily designed
to prevent the vehicle from rolling while
parked. It operates against the rear
wheels.
To engage
The lever engages automatically, the
indicator lamp in the instrument panel
comes on when the ignition key is in
position 2. Refer to page
21 .
To release
Pull up slightly on the lever, press the
button (arrow) and lower the lever.