BMW G 650 GS, Руководство пользователя для мотоциклиста

Страница: 91 / 137

Insert suction pipe in guides 7
of air filter housing. Make sure
rubber gaskets of air filter insert
are not folded.
Insert connecting flange 2 .
Install two screws 1 .
Installing right fairing side panel
(
95).
Jump-starting
The wires leading to the
power socket do not have
a load-capacity rating adequate
for jump-starting the engine. Ex-
cessively high current can lead
to a cable fire or damage to the
vehicle electronics.
Do not use the socket to
jump-start the engine of the
motorcycle.
A short-circuit can result
if the crocodile clips of
the jump leads are accidentally
brought into contact with the
motorcycle.
Use only jump leads fitted with
fully insulated crocodile clips at
both ends.
Jump-starting with a donor-
battery voltage higher than
12 V can damage the motorcycle
electronics.
The battery of the donor vehicle
must have a voltage of 12 V.
Park the motorcycle, ensuring
that the support surface is firm
and level.
Remove seat (
38).
Removing center fairing panel
(
94).
Do not disconnect the battery
from the onboard electrical sys-
tem when jump-starting the
engine.
8
89
z Maintenance