BMW G 650 GS, Руководство пользователя для мотоциклиста

Страница: 78 / 137

Affect of wheel sizes
on suspension control
systems
The wheel sizes play a major role
with the ABS system. The di-
ameter and width of the wheels
stored in the control unit have
particular significance as the
basis for all necessary calcula-
tions. A change in these sizes
due to conversion to others than
the wheels installed as standard
equipment can seriously affect
the control comfort of the sys-
tem.
The sensor wheels required for
wheel speed detection must also
match the system installed and
may not be replaced.
If you want to equip your
motorcycle with different wheels,
please contact a specialist
service facility, preferably a
BMW Motorrad Dealer. In some
cases the data stored in the
control unit can be adapted to
the new wheel sizes.
Removing front wheel
Make sure ground is level and
firm and place motorcycle on a
suitable auxiliary stand.
Remove screw 1 and take
wheel speed sensor out of
bore. Note whether or not a
washer is installed.
Raise front of motorcycle
until the front wheel can turn
freely. To lift motorcycle,
BMW Motorrad recommends
using BMW Motorrad front
wheel stand.
Mounting front wheel stand
(
80).
Remove axle clamping screw 2 .
Remove axle 3 while support-
ing wheel.
Do not remove grease on axle.
Make sure that the wheel
speed sensor is not damaged
when rolling out the front
wheel.
Roll front wheel forward to re-
move it.
8
76
z Maintenance