EN/8
Retrofit / Installation kit No. 66 20 0 007 031
Installation Instructions No. 01 29 0 137 628
Issue date: 02.2002
5.
To install the ultrasonic converter wiring harness and the ultrasonic
converters
0
0
0
0
0
Remove the cover cap (1) and clip in the retaining
clips (2) and cable ties (3).
0
On cars with a trailer hitch module, the cover
cap has been replaced with a grommet.
Remove the grommet from the ultrasonic
converter
U
, take the plug casing on branch
P
off the plug strip and thread the plug strip
through the existing grommet in the trailer
hitch module. Then fit the plug casing
again.
"
Lay branch
P
on the ultrasonic converter wiring
harness into the boot and seal the hole with the
grommet
U
. Lay the ultrasonic converter wiring
harness along the rear apron, clip it into the cable
holders (1) and secure it with the cable ties (2).
0
Lay the ultrasonic converter wiring harness
O
along the standard wiring harness to the front and
secure it with cable ties.
F 46 0779 EVA
1
2
3
F 46 0778 EVA
U
P
2
1
F 46 0776 EVA
O
