EN/11
Retrofit / Installation kit No. 66 20 0 007 031
Installation Instructions No. 01 29 0 137 628
Issue date: 02.2002
7.
To install the power supply wiring harness
0
0
0
0
0
0
Lay the power supply wiring harness
A
from the
PDC control module along the standard wiring
harness in the right sill to the fuse box above the
glove compartment.
In RHD cars the same installation route for
the power supply wiring harness is to be
used as in LHD cars. To do this the ties on
the power supply wiring harness also have to
be cut open.
"
0
Connect branch
B
on the power supply wiring
harness, green/white cable, to the fuse holder II,
A47 (1) (X10016) slot F 24, Pin 48 and insert a flat-
bladed fuse (2) 5A.
0
Connect the cables on the power supply wiring
harness to the appropriate joint connectors in the
joint connector box (1) as shown in the table
below:
0
Vehicles without a gong only
Cable
A1
with the blue/yellow cable
Connector X428
Cable
A2
with the brown cable
Connector X219
Cable
A3
with the white/red/yellow cable
Connector X10116
Cable
A4
with the red/yellow cable
Terminal R
Vehicles with a gong only
Cable
A1
with the blue/yellow cable
Connector X428
Cable
A3
with the white/red/yellow cable
Connector X10116
F 46 0783 EVA
B
A
1
3
5
7
9
11 13 15
16 18 20 22
24 26 28 30 32 34
2
1
B
F 46 0202 EVA
A2
A4
A1 A3
1
F 46 0206 EVA
