EN/12
Retrofit / Installation kit No. 66 20 0 007 031
Installation Instructions No. 01 29 0 137 628
Issue date: 02.2002
7.
To install the power supply wiring harness
0
0
0
0
Vehicles without a gong only
Cut the prepared cut-out (1) for the gong (2) out of
the footwell trim on the driver’s side (3) and insert
the gong (2).
Connect socket contact
D1
, blue/grey cable, to
the 1-pin socket casing
D
. Connect socket
contact
C1
, brown cable, to the 3-pin socket
casing
C
Pin 1 and socket contact
C2
, red/yellow
cable, to the 3-pin socket casing
C
Pin 3.
Connect the socket casing
D, C
to the appropriate
slots on the gong:
1-pin socket casing
D
to slot T4 (X363)
3-pin socket casing
C
to slot T3 (X522)
Vehicles with a gong only
Connect socket contact
D1
, blue/grey cable, to
the 1-pin socket casing
D
and connect this to slot
T4 (X363) on the gong.
Tie back the cable lengths that are not
required.
"
0
Connect the blade terminal contact
E
, brown/
black cable, to the joint connector (1) (X217) near
the steering column in the footwell on the driver’s
side.
Tie back the cable lengths that are not required on
the RHD model.
Select the installation route of the cables so
that they cannot be damaged by moving
parts. Secure the joint connectors and
cables at suitable points using cable ties.
"
F 46 0208 EVA
12
11
10
13
E
F 46 0209 EVA
