5/2012
01 29 2 221 219
© BMW AG, Munich
(Z/Z)
2
Installation information
When routing fibre optic cables, make sure the bending radius is no less than 25 mm.
Refer to the instructions for handling fibre optic cables acc. to ISTA No. 61 00 ....
Ensure that the cables and/or lines are not kinked or damaged as you install them in the car. Costs arising from this
will not be reimbursed by BMW AG.
Additional cables/lines that you install must be secured with cable ties.
If the specified PIN chambers are occupied, bridges, double crimps or twin-lead terminals must be used.
All pictures show LHD cars; proceed accordingly on RHD cars.
After the installation work, the retrofit must be programmed/coded via the –
Conversions
– path.
The video switch retrofit kit must only be installed if input 3 on the radio receiver is occupied or in cars with RSE
(for the assignment of inputs on the radio receiver, see the section entitled "Information on pin assignment on the
radio receiver" at the end of these installation instructions). Special tools required
Ordering instructions
DVD changer
B
and the cable tie with holder
I
are not part of the retrofit kit and must be ordered separately (for part
numbers and instructions, see EPC).
If the video switch retrofit kit is installed, video switch
AA
must be ordered separately (for the part number and
instructions, see the EPC).
List of special equipment
The following special equipment must be taken into consideration when installing the retrofit kit:
SA 3AG
Rear view camera
SA 6UK
Night vision with person recognition
SA 5DL
Surround view
SA 601
TV function
SA 609
Professional navigation system
SA 7SP
Professional navigation system with integrated Bluetooth mobile phone preparation
Special tools required
00 9 317, Installation wedge
54 3 120, Support
