EN/24
Retrofit / Installation kit No. 65 12 0 029 649 (others see cover sheet)
Issue date: 05.2001
Installation Instructions No. 01 29 0 029 574
8.
To install the CD changer (cars with an on-board monitor and without a DSP amplifier only)
0
Remove the three transport guard screws (40)
from the CD changer (1) and seal the apertures
with the adhesive discs supplied (adhesive discs
are supplied with the CD changer).
Remove the two covers (41) and set the
adjustment mechanism (42) with a straight slot
screwdriver to
V
(vertical installation) and then re-
affix both covers (41).
0
Connect branch
A4
, black 3-pin socket casing on
the power supply cable
A
or the standard power
supply plug
X18180
to the plug casing on the
power supply connector (40) on the CD changer
(1).
Connect branch
C2,
black 6-pin socket casing on
the control cable C or the standard plug
X18729
to
the plug casing (41) on the CD changer (1).
0
Insert the CD changer (1) with the inserted speed
nuts (17) and the two fillister head Philips screws
M4x10 (20) into the holder.
Tighten the two fillister head Philips screws M4x10
(20), which you previously screwed halfway in.
V
H
V
H
1
42
40
41
41
F 39 0928 B
C2/X18729
41
40
A4/X18180
1
F 39 0929 B
1
17
20
20
1
F 39 0930 B
