EN/18
Retrofit / Installation kit No. 65 12 0 029 649 (others see cover sheet)
Issue date: 05.2001
Installation Instructions No. 01 29 0 029 574
7.
To install the CD changer (cars without an on-board monitor, without a DSP amplifier and
with Professional radio SA663 after production date 03/01 only)
0
Lay adapter cable
E
with control cable
B
along the
audio wiring harness as follows.
Connect branch
E1
, white 12-pin socket casing on
control cable
E
, to the new generation radio
connection plug
X18126
in the centre console.
Lay control cable
B
from the radio (40) under the
centre console to the left.
Lay control cable
B
between the transmission
tunnel and carpet along the audio wiring harness
under the left seat to the B pillar and along the
door sill to the rear window shelf.
0
Thread control cable
B
through the rubber
grommet (40) into the boot to the installation site of
the CD Changer and secure it with cable ties.
0
Connect the white 12-pin socket casing (E1) on
adapter cable
E
to the new generation radio
connection plug (40).
Connect the new generation radio connection
plug (40) and install the radio.
0
The figure shows the boot at the rear left.
Push the expanding nut (12) into the existing hole
(40).
X18126
E1
40
B
E
039 0002 B
40
B
F 39 0910 B
E1
40
E
F 39 0911 B
40
12
F 39 0912 B
!
