EN/19
Retrofit / Installation kit No. 65 12 0 029 649 (others see cover sheet)
Issue date: 05.2001
Installation Instructions No. 01 29 0 029 574
7.
To install the CD changer (cars without an on-board monitor, without a DSP amplifier and
with Professional radio SA663 after production date 03/01 only)
0
Place three speed nuts M5 (17) on to the base
holder (9).
Insert the base holder (9) and secure it with the
hexagonal self-tapping screw (21) and two cap
nuts M5 (16).
0
Remove the three transport guard screws (40)
from the CD changer (1) and seal the apertures
with the adhesive discs supplied (adhesive discs
are supplied with the CD changer).
Remove the two covers (41) and set the
adjustment mechanism (42) with a straight slot
screwdriver to
V
(vertical installation) and then re-
affix both covers (41).
0
Connect branch
A4
, black 3-pin socket casing on
the power supply cable
A
or the standard power
supply plug
X18180
to the plug casing on the
power supply connector (40) on the CD changer
(1).
Connect branch
B2,
black 6-pin socket casing on
the control cable
B
or the standard plug
X18729
to
the plug casing (41) on the CD changer (1).
0
Insert the CD changer (1) into the holder (10) and
secure it with the four fillister head Philips screws
(20).
Secure the connection cable for the CD changer
(1) with the holder (40) to the hole (41) from the
inside.
Place the CD changer (1) with the holder (10) on
the base holder (9) and secure it with three
hexagonal screws (18).
9
16
21
17
16
F 39 0913 B
V
H
V
H
1
42
40
41
41
F 39 0914 B
B2/X18729
41
40
A4/X18180
1
F 39 0915 B
18
20
20
41
9
40
1
10
F 39 0916 B
