EN/15
Retrofit / Installation kit No. 65 12 0 029 649 (others see cover sheet)
Issue date: 05.2001
Installation Instructions No. 01 29 0 029 574
7.
To install the CD changer (cars without an on-board monitor, without a DSP
amplifier and with Professional radio SA663 after production date 03/01 only)
0
The installation of the power supply cable
A
for the CD change is
only necessary
, if the
black 3-pin socket casing
X18180
on the
power supply for the CD changer is not tied
back on the audio wiring harness.
0
Disconnect the white 12-pin plug connector
X322
.
Disconnect the existing socket contact from slot
PIN4
, white/grey/yellow cable on the white 12-pin
socket casing
X322B
.
Connect branch
A1
, 1-pin socket contact, white/
grey/yellow cable on the power supply cable
A
to
the white 12-pin socket casing
X322B
in slot
PIN4
.
Connect the supplied 1-pin black socket casing to
the disconnected socket contact and connect it to
branch
A1
, black 1-pin plug casing, white/grey/
yellow cable.
0
Disconnect the existing socket contact from slot
PIN1
, red/green cable on the white 12-pin socket
casing
X322B
.
Connect branch
A2
, 1-pin socket contact, red/
green cable on the power supply cable
A
to the
white 12-pin socket casing
X322
in slot
PIN1
.
Connect the supplied 1-pin black socket casing
on to the disconnected socket contact and
connect it to branch
A2
, black 1-pin plug casing,
red/green cable. Remove the left tail light.
F 39 0901 B
X18180
A
!
A
X322
A1
F 39 0902 B
A
X322
A2
F 39 0903 B
