BMW 5 series sedan, Руководство пользователя

Страница: 230 / 402

Camera
The camera is installed near the interior mirror.
Keep the windshield in front of the interior mirror
clean and clear.
Functional requirements
▷ Speed below 130 mph/210 km/h.
▷ Sufficient lane width.
▷ Above approx. 43 mph, 70 km/h: lane mark‐
ing on both sides is detected.
▷ Below approx. 43 mph, 70 km/h: lane marking
on both sides or a vehicle driving ahead is de‐
tected.
▷ Hands on the steering wheel rim.
▷ Wide curves.
▷ Drive in the center of the lane.
▷ Turn signal switched off.
▷ The sensor system calibration process is
complete.
▷ Cruise control with distance control active.
▷ Safety belt on the driver's side fastened.
▷ Approach Control Warning active.
▷ Pedestrian Warning active.
▷ Side Collision Warning active.
Switching on/off
Assisted Driving Mode
General information
This button is used to switch the config‐
ured function on and off.
The button can be used to set the pri‐
marily used function.
Set function
When the system is active, press the
button repeatedly until the desired func‐
tion is selected in the function bar. The function
bar for Assisted Driving mode is displayed at the
bottom of the instrument cluster.
Symbol Function
Cruise control with distance control.
Depending on the equipment ver‐
sion, cruise control with distance
control and steering and traffic jam
assistant.
The selected function is shown in green.
The setting is stored for the driver profile cur‐
rently used.
Switching on
1. Press the button on the steering
wheel.
2. Adjust the steering and traffic jam
assistant if necessary.
Steering wheel symbol lights up gray.
The system is on standby and does not
manipulate steering.
Seite 230
CONTROLS
Driver assistance systems
230
Online Edition for Part no. 01405A11338 - VI/20