15
Main screen
4.1 Measurement Condition Setting
There are two ways to set and modify the measurement conditions. One is fast setting, and the other is setting via
the menu.
The fast setting is used for brief and frequent modification during routine measurement to improve the efficiency.
In the main screen, press Set to enter fast setting mode. Follow the cursor, and press Up/Down/Left/Right arrow to
modify the corresponding measurement condition. Press Return to confirm and exit.
In the main screen, press and hold Set to enter Menu Setting mode. Select “Measure Set” to modify “Sampling
Length”, “Evaluation Length”, “Range”, “Filter”, “Standard”, “Parameters”, “C (Rmr)”, “C (RPc)”, “Rmr (Rδc)”, “Unit
of Measurement.
4.2 System Setting
In the main screen, press and hold Set to enter Menu Setting mode. Select “System Set” to enter “System Set”
menu item. Under this menu, you can set the following contents:
Key Buz
Warning Buz
Power saving time
Auto power off time
Clock Setting
Low-noise measurements
Screen test
Remote controller paring
Surface type selection
Press Return to confirm and exit.
4.3 Software information
The software information contains the model of the instrument, software version, the serial number and the
identification No
