BMR SFU 0303/4, Руководство пользователя

Страница: 22 / 48

20
SFU 0303 Frequency Converter
Start and Stop at the operating panel
In the simplest case, a connected and appropriately set up spindle can be started by pressing
the Start-Button. The desired speed can be adjusted by dialing with the rotary encoder either
as preset value during standstill or in Run mode. The preconditions for a correct Start can be
looked up under 7.1 and 7.5 .
Any error or malfunction is displayed as plain text
All relevant system messages on rotational speed, load or problems are displayed on the LCD
display
The current power output is displayed in the lower part as analogue load bar as % and
absolute.
An overload condition will be displayed as well.
The pre selected speed, the selected characteristic and current speed are displayed
Attention:
The operation of a spindle with an incorrect spindle characteristic may
harm the spindle severely!
Please ensure that the correct characteristic is selected
If several spindles are operated simultaneously, it has to be ensured that
they are of the same type and that a specific characteristic is selected.
Otherwise this may harm one or more spindles or the converter severely!