BMR SFU 0303/4, Руководство пользователя

Страница: 13 / 48

…when it comes to quality! BMR GmbH
11
6.2 Version SSE: Mains and Spindle connection
View at screw terminals at version SSE:
Pin Name Direction Function
1 +VFP Output Auxiliary voltage supply for active speed sensor 12V/50mA
2 SGND Ground reference for signals FP, PTC
3 FP Input Input for 2/3-wire speed sensors / Hall sensor
4 PTC Input
temperture signal of the spindle or as option KTY setting
via interface X4-Pin3 -> 6.3
5 W Output Spindle Phase W
6 V Output Spindle Phase V X4
7 U Output Spindle Phase U
8 Rext Output External Brake resistor / Chooper Resistor
9 +ZU Output Intermediate voltage (! Attention, High Tension!)
10 PE Output Connection for protective earth of spindle ! Safety !
+VFP
SGN
D
FP
PTC
W
V
U
Rext
+ZU
PE
L
N
PE
Name Function
PE
protective Earth ! Safety
!
N Null
L Phase
The device has no internal fusing. It has to be fused externally
Please ensure, that PE protective earth is connected at the mains side. The
device must not be operated without properly connected PE!
Please ensure, that PE protective earth is connected at the spindle side as
well as at the mains side.
Control wires, Mains cables and spindle cables should be installed
separately.
For wiring, the use of shielded cables is recommended.
+VFP
SGND
FP
PTC
W
V
U
Rext
+ZU
PE
PE
N
L