13
7.
With a pen or similar make a short press on the CommLink pair button
7
. This will initiate the pairing between the CommLink and the BC300
External Shunt. The CommLink status indicator
6
will now be flashing
blue
. Observe the CommLink status indicator while the pairing is
occurring, it may take up to one minute for the pairing to complete
a. If the pairing is successful the CommLink status indicator
6
will
stop flashing
blue
and will then begin flashing
green
at 5 second
intervals. Continue to step 8.
b. If pairing fails, the CommLink status indicator
6
will return to
flashing
orange
. If this happens then disconnect the BC300 External
Shunt’s positive flying lead
3
from the battery and return to step 5
to repeat the pairing procedure.
Note
: if you have multiple pairing failures at this step try installing the
CommLink closer to the BC300 External Shunt or identify possible
interference sources. This may require a longer data cable to locate the
CommLink closer to the BC300 External Shunt. Return to step 5.
8.
Congratulations, the BC300 External Shunt + CommLink system
installation is complete.