BMG Labtech FLUOstar OPTIMA, Руководство по эксплуатации

Страница: 7 / 23

BMG LABTECH FLUOstar / POLARstar / LUMIstar OPTIMA Operating Manual
2007-11-19 0413B0001I 7/23
2 Installation
When unpacking the instrument, please check to ensure that all parts are included.
The shipping box should contain:
•
FLUOstar OPTIMA or POLARstar OPTIMA or LUMIstar OPTIMA
•
Control and evaluation software (CD ROM in a cover inside this manual)
•
Manual
•
Power cord
•
RS232 cable
•
Service box containing: - Allen key (1.5mm)
- 2 extra fuses: T2.5A/250V for main power 230 V
T3.15A/250V for main power 115 V
T3.15A/250V for main power 100 V
- injector needle cleaner (if with reagent injectors)
Call BMG LABTECH immediately if any of these items are missing.
The area designated for the instrument should be free of dust, liquids and acidic vapours. The table's surface
should be flat and even. Avoid areas subject to vibrations and direct sunlight.
Upon unpacking and positioning the reader make sure to unlock the transport pin (section
2.1 Transport Pin) before any power connection (section 2.2 Power and Communication
Connections).
2.1 Transport Pin
When the instrument is shipped or moved to a different location, the transport pin should be in the locked
position.
The transport pin is located in the back left corner of the reagent box (figure 2). Once the instrument is in its
permanent location, the transport pin should be unlocked to free the plate carrier. To do this lift up the
transport pin and turn it counter-clockwise and leave the pin in the groove.
Figure 2: Left: transport pin in locked position (pin is down).
Middle: transport pin in unlocked position (pin is up).
Right: the groove where the transport pin can lock the plate carrier
LOCKED POSITION
(pin is down, pointing left)
UNLOCKED
(pin is up, pointing right)
When plate reader
is to be moved
When plate reader
is in position.
Ready to measure
The groove where the transport pin fixes the plate
carrier
(left: the groove, middle: the groove zoom view)