Blunet BL-32960M Скачать руководство пользователя страница 97

Страница: 97 / 224

(1)

Move to Weekday Night, Weekend Day, Weekend Night and select No Rec. as above picture due

to set recording Cam # 2 for Weekday Day only.

(2)

In case of other camera, it can set recording as same as above for the wanted time schedule.

(3)

Set to record other cameras as above for wanted schedule, and exit menu using [Exit] key.

As above setup, Cam #1 records full time and Cam #2 & other cameras set to record for Weekday Day.

16.1.5.

Alarm Recording Setup

This menu can set up Alarm Recording.

Alarm recording can work in recording by ‘Sensor’, recording by ‘Motion Detection’ and recording by

‘Text’. To do Alarm recording, it should set Global setup or Setup by Channel at ‘Schdule Rec.’ in

advance.

After setup Recording condition, it must set “Alarm Recording” menu to “On” at “Schedule Rec.”. (Refer

to ‘5.2.1 Global Setup or ‘5.2.2. Setup by Channel’). Also, before steup alarm recording, it must setup

“Alarm Source”.

16.1.5.1.

Alarm Source Setup

Study the method of Sensor, Motion Detection, Text setup to do Alarm Recording.

Содержание BL-32960M

































































































































































































































Результаты поиска

Содержание BL-32960M

Отзывы:

Похожие инструкции для BL-32960M

Бренды по названию

Популярные бренды

Blunet BL-32960M, Инструкция по установке и эксплуатации

Результаты поиска

Содержание BL-32960M

Отзывы:

Похожие инструкции для BL-32960M

Бренды по названию

Популярные бренды