Blunet BL-32960M, Инструкция по установке и эксплуатации

Страница: 22 / 224

22
6.
Setting remote controller
When controlling several eDVRs with one remote controller, set Remote Contorl ID as follows.
6.1.
Setting ID of eDVR
(1) Press the [MENU] button
(2) Select “System” with using [
?
] button and press the [
?
] or [? ] button
(3) Select “Miscelleaneous” from the sub-menu list using the button[? ] and press [
?
] button.
(4) Select “Remote Control ID” and press the [
?
].
(5) Select a value using the [
?
/
?
] buttons and press the [EXIT] button.
(6) Press the [EXIT] button to exit the Settings Page and return to Monitor mode.
<Note> Remote Control ID
Up to 16 eDVRs can be controlled with a single remote controller.
When not using remote controller, set the Remote Control ID as “Off”.