Blumax GPS-4013, Руководство пользователя

Страница: 11 / 23

- 20 - - 21 -
Blumax Bluetooth GPS-4013 Receiver
Appendix A. How to change battery
Step 1 Press the button
to right side
Step 3 Take out the battery Step 4 Fit new battery
into GPS-4013
Step 2 Open the cover
of battery
Step 5 From R to L close
the cover
Step 6 Done
Appendix B. Helpful tips
Your Blumax Bluetooth GPS-4013 Receiver should be treated
with care and properly maintained to ensure the best perform -
ance� Keep in mind these helpful tips when using your receiver:
Some vehicles having heavy metallic sun protecting coating on
•
windshields, which may affect signal receptions.
Driving in and around high buildings may affect signal recep -
•
tions�
Driving under tunnels or in buildings may affect signal recep -
•
tions�
Low battery of a PDA or of an Blumax Bluetooth GPS-4013
•
Receiver may affect signal receptions.
Please check the correct “COM” and “Baudrate” of your PDA.
•
In general, any GPS receiver performs best in open space
•
where it can see clean sky� Also weather will affect GPS recep -
tion – rain & snow contribute to worse sensitivity�
Blumax Bluetooth GPS-4013 Receiver output data updates
•
every second, thus the actual position and the position in your
map may have time delay� This may happen when you drive at
higher speed or make a turn around a corner�
Note that Blumax Bluetooth GPS-4013 Receiver may not work
•
indoors where it can not see the sky�
For the 1st time you use the Blumax Bluetooth GPS-4013 Re-
•
ceiver, it will take 1 to 3 minutes to get the satellite constellation
and fix your position, this is called “Cold Start”. If you replace
the battery, Blumax Bluetooth GPS-4013 Receiver will do Cold
Start again�
If your Blumax Bluetooth GPS-4013 Receiver can’t fix your
•
position for more than 20 minutes, we suggest you change to
another open space and then try again�