Blumax GPS-4013, Руководство пользователя

Страница: 6 / 23

- 10 - - 11 -
Blumax Bluetooth GPS-4013 Receiver
Start to use
1. Fully charge the battery when using at the first time
A fully charged battery can last up to 32 hours continuously
operation�
2. Activate the Bluetooth function in your PDA/Smart
phone or PC
Before activating the Bluetooth function in your PDA/PC,
please switch on Blumax
Bluetooth GPS-4013 Re-
ceiver for paring and check
if your device is equipped
with Bluetooth function� If
not, you may need to ac-
quire an optional CF/SD
Bluetooth card or Bluetooth dongle�
NOTE: The pairing procedure is required to execute in the
first time only. And the pass code is “0000” if required.
3. Automatically create a shortcut in Bluetooth Manager
window
After the pairing complete, the system will then find a quick
connect device “BT A+ GPS” in Bluetooth Manager. In fur-
ther use, you just need to click it to connect to this Bluetooth
GPS Receiver.
4. Check the Serial Port in Bluetooth Setting
After complete pairing with the Receiver, please click “Serial
Port” to confirm the assigned COM port. If you use PDA/
PC to pair the GPS Receiver, please check “Outbound COM
port”.
5. Set correct Serial Port in your map software
Activate your navigation software and make sure to select
the correct “Serial Port”.
NOTE: In the map software such as TomTom, you might
need to change preference and set “Other Bluetooth GPS”
according to PDA/phone model. In some case please con-
sult map software company to vary the setting if you have
issue on positioning�
6. Switch off the Bluetooth function
Switch off GPS function in your PDA/Smart phone/PC, then
the Bluetooth connection will be disconnected automatical -
ly. Then put Blumax Bluetooth GPS-4013 Receiver power
switch to “OFF” position.
on off
Function of Smart Power Control (Power saving mode)
Blumax Bluetooth GPS-4013 Receiver supports Smart Pow-
er control (Power saving mode)� It can automatically enter
sleeping mode after the Bluetooth connectivity is turned off,
so the Blue LED will turn to flash every 5 seconds. Thus you
can always power it on with very low power consumption�
Under power saving mode, when detecting Bluetooth is be-
ing connected, Blumax Bluetooth GPS-4013 Receiver will
wake up itself and the blue LED will turn to flash every
2 second and GPS Orange LED will be also on�
Function of Smart Power Control