12
BA-092/0EN MZK.1900/8800
4 - Working with the drilling head
• Main switch
(4.1)
off
• Connect the air supply to the air filter unit of the assembly
machine
• Hold down clamp
(4.2)
at Pos "OFF."
• Place the cabinet side outside of work area (drilling/insertion
machine) on to the work top and secure.
• Swivel in drilling depth template
(2.8)
.
• Swivel out hold down clamp
(4.4)
.
• Press and hold the feed switch
(4.3)
.
• Slide the cabinet side to the drill and check whether or not the
drills touch the top side of the workpiece (AH).
• Release the feed switch
(4.3)
.
4.1 - Checking the drilling depth setting
• If the drilling tips do not reach the top face of the workpiece
(AH), correct the setting.
• Turn the knurled screw
(2.7)
.
Decrease the depth:
Turn knurled screw
(2.7)
to the
right
Increase the depth:
Turn knurled screw
(2.7)
to the
left
(one turn equals a 1.5 mm depth setting.)
• Tighten and lock the knurled screw
(2.7)
.
• Re-trigger test cam and check the setting.
4.2 - Correcting the drilling depth setting
Important
Swivel out the drilling depth setting template
(2.8)
to achieve a drilling depth of 13 mm.
4.3
AH
2.7
2.6
2.8
!
4.1
2.7
2.8
4.3
4.2
4.4
4.4
