10
BA-092/0EN MZK.1900/8800
2.1 - MINIPRESS preparation
• Main switch
(4.1)
off
• Disconnect machine from compressed air and power supply.
• Swivel out hold down clamp
(4.4)
.
• Remove all drill bits from the assembly machine.
• Remove all drilling depth stops.
• To ensure that the drilling depth with the attached drilling head
does not have to be re-set with the drilling depth screw, a
spacer
(2.6)
attached.
• Attach the spacer
(2.6)
to the drilling depth setting screw.
2 - MINIPRESS preparation
2.2 - Inserting the driving pin
There are two types of locking devices:
a) Driving pin for standard chuck MZK.1120
(2.3)
enclosed
b) Driving pin for quick connect chucks MZK.1130
(2.4)
must be ordered separately
• The corresponding driving pin
(2.3/2.4)
is inserted (like a drill
bit) into the centre spindle
• Remove drill sleeve
(2.5)
.
• Remove cover cap
(1.6)
.
2.3 - Attaching the spacer
ATTENTION
The spacers must be flush with the knurled screw
(2.7)
and completely engaged.
• This ensures the same drilling depth as before without a drill
-
ing head.
4.1
2.7
2.8
4.3
4.2
4.4
4.4
2.7
2.6
2.8
2.3
2.4
2.5
