6
BA-092/0EN MZK.1900/8800
D - Safety information
D.1 - Remaining risks according to EN ISO 12100-2
• The drilling head complies with current safety standards. However, there are remaining risks.
• There are remaining risks due to the stroke movement of the drilling unit to the operator and secondary personnel if safety devices
are removed or control elements should fail.
• Other remaining risks are indicated by the safety decals and the following safety information. It is therefore absolutely necessary to
follow all safety instructions carefully.
D.2 - Safety decals
• Keep hands away from the danger zone of the hold down clamps - pinch danger.
• Do not remove safety devices - danger of injury.
• Keep hands away from the drill or swing arm during the drilling or insertion process.
• Disconnect electrical and pneumatic connections before making any repairs (plug / rapid hose coupling).
• Only one person at a time should operate the machine.
• Wear proper eye and face protection when operating this machine.
• Completely read the instruction leaflet and safety information before operating the machine.
• Completely read the instruction leaflet and safety information before operating the machine.
D.3 - Intended use
• This drilling head is only intended for drilling holes in work pieces of wood, particle board or epoxy coated wood. The drilling head
should only be used in commercial and industrial applications. It was designed exclusively for use with the Blum MINIPRESS M,
MINIPRESS P and MINIDRILL. The manufacturer assumes no liability for uses not described in the instruction leaflet.
• Keep hands away from drill bits.