Repeat procedure
A 1–2
for additional SERVO-DRIVE switches in the
cabinet.
Press the SERVO-DRIVE switch until the LED lights up green continuously
Press on front: The reference run starts automatically
Front opens and closes 2x automatically:
Under no circumstances should you try to manually interrupt or stop the
process
Reference run is required:
LED flashes
Close the front manually
If there is an interruption, reset the reference run
→ see Reset Motion
E 1
. The reference run restarts.
Start-up
SERVO-DRIVE for AVENTOS
Activating the
SERVO-DRIVE
switch
Each switch can only be allocated to one SERVO-DRIVE unit.
Press the <SWITCH> button until the LED flashes green.
The drive unit recognises the required parameters using the reference run.
Operation
Lights up continuously
Flashes
Setting up the wireless connection between the SERVO-DRIVE switch and the drive unit.
Start reference
run
NOTICE
Additional features must be activated before the reference run.
Activating synchronisation
Activating collision avoidance
14
1
1
2
4
2
3
3
C
D
A
B