26
V1.1
SmartBus P900-TI6N USER MANUAL
L
E
D
3. Press the key corresponding to the zone that you wish to be the chime zone.
4.
To enter zone number more than 9, press button [F] to represent the ten’s digit.
5. E.g. To enter zone number 12, press [F] + [2], zone number 16 press [F] + [6].
6. Press
[#]
key to exit the chime mode and keypad audible indicator will sound 2 beeps to
confirm the command.
TO CANCEL CHIME ZONE:
Repeat the above steps and ensure that the zone indicator is extinguished.
FIRE MODE
[F]
(Press and hold down for 2 seconds)
1. This key will activate the FIRE ALARM condition when it is held down for 2 seconds.
2. The FIRE ALARM condition can also be triggered by an installed smoke detector, which
is set as fire zone.
3. The siren will sound and the FIRE REPORTING CODE will be transmitted to the central
monitoring station.
4. To silence the siren, enter a 4-digit user code followed by [#] key.
PANIC MODE
[P]
(Press and hold down for 2 seconds)
1. The PANIC ALARM condition will be activated when:
2. Press and hold down
[P]
key for 2 seconds.
8.12 EMERGENCY SITUATION
Indicate the status of the zones
To program zone 3 and zone 4 as CHIME zones:
Press and hold down
[9]
for 2 s
[3]
+
[4]
+
[#]
Keypad audible indicator will sound 2 beeps to confirm
the command. Zone 3 and 4 are now CHIME zones.
