17
V1.1
SmartBus P900-TI6N USER MANUAL
L
E
D
There are various options for arming the system
a.
Partition Arming
b.
Away Arming
c.
Day Arming
d.
Night Arming
e.
Force Arming
f.
Holiday Arming
g.
Remote Control Arming
h.
Timer Auto Arming
i.
Telephone Remote Arming
For information on how to ARM Partition system, please refer to PARTITIONING THE SYSTEM
at page 28
(Section 8.13)
.
[
] + [USER CODE] + [#]
(Leave via ENTRY/EXIT Zone)
1. Ensure that all zone indicators are distinguished; if not, check that all protected premises
are closed.
2. Press the
[
]
key to cancel any unintended entries.
3. Enter a valid 4-digit
[USER CODE]
. If you enter any mistakes, press
[
]
key and re-enter
the code followed by
[#]
key to confirm you command.
4. P1 indicator will illuminate.
5. The keypad audible indicator will sound on and off for the duration of the
EXIT
delay.
6. Any bypassed zones will be shown by the flashing zone indicators.
7. Leave the premises only via the
EXIT/ENTRY
zone.
8. During AWAY arming, the telephone line will be supervised hourly. If the telephone line is
disconnected, a new trouble condition will be registered (please refer to View System
Trouble page 24).
9. User will be given an
ENTRY
delay time to disarm the system when enter the protected
premises via
ENTRY/EXIT
zone.
10. It is also possible to AWAY arm by simply press and hold down key
[1]
for 2 seconds.
[1]
(Press and hold down for 2 seconds)
8.4 ARMING THE SYSTEM
8.4.1 AWAY ARMING
