Bluezone 450, Инструкция по установке, эксплуатации и обслуживанию

Страница: 6 / 30

Document #: BPI-PM007-01
5
Installation Guidelines
Place the Model 450 in the room so that air
flow from the HVAC system, fans or other
air flow systems does not blow directly into
or pull air through the Model 450 air inlet or
clean air outlet.
Ensure a minimum clearance distance of 2’
(0.6m) from an HVAC ceiling diffuser,
register or inlet grille to the Model 450.
Ensure a minimum clearance distance of
10’ (3m) from the air outlet of an air
conditioning or mini-split outlet to avoid
forcing excessive air flow through the
Bluezone unit.
Place the unit so that the control panel and
display are visible and accessible.
If multiple Bluezone Model 450 units are
being installed in a room, the following are
recommended guidelines for the placement
of the Bluezone units:
1. Distribute the units relatively evenly
throughout the space.
2. Generally spreading the locations
across the available space is good
practice.
3. Warning: If the unit is located in an
area with foot traffic and there is a
concern that it could be bumped by
personnel, it should be labeled with
colored tape to make it more visible
and reduce the risk of collision.
4. Warning: To avoid risk of injury
from bumping into the unit, use the
ceiling mount kit, Bluezone by Middleby
cabinetry, or mount on shelf above
head level.
5. Warning: Locate the junction
boxes for the units as close as possible
to the units to avoid the risk of hooking
the cord and pulling it out. If the
distance to the junction box is more
than 2’ (0.6 m), the cord should be tied
to the wall, rack, or ceiling to keep it
protected.