Bluezone 450, Инструкция по установке, эксплуатации и обслуживанию

Страница: 2 / 30

Document #: BPI-PM007-01
1
IMPORTANT SAFEGUARDS
READ AND SAVE THESE INSTRUCTIONS
Safety
This manual contains important instructions
and safety information about the Bluezone Air
Purification System. Observe the following
dangers, warnings, cautions and notices
when installing, operating and servicing the
Bluezone Model 450.
Electrical System
Energized electrical circuits present a
potentially life-threatening hazard.
Ensure the unit’s power cord is unplugged
before performing any installation or service
work.
Ensure there are no other electrical power
circuits connected to the Bluezone Model
450.
Do Not Operate unit with a damaged cord or
plug. Discard unit or return to an authorized
service facility for repair.
Follow all lockout/tagout procedures for all
electrical circuits.
System Operation
Do not operate the Bluezone Model 450
while fogging with chlorine bleach or other
disinfectant solutions. Disinfectants can
poison the Bluezone catalyst and reduce its
effectiveness.
•
Turn off the Bluezone Units if
disinfectant fogging or cleaning is
underway.
•
Turn Bluezone units back on after
disinfectants have dissipated.
Never hose down the Bluezone Model 450 or
clean with a water jet. Direct flow of water
onto the catalyst can reduce its effectiveness
in eliminating ozone.
Turn off Bluezone units and cover with plastic
if the room is being hosed with water or
steam.
System Maintenance
The Bluezone Model 450 contains 4 UV-C
light bulbs; the UV light is completely
contained inside the unit during operation.
Unplug or disconnect the unit from power
source prior to any servicing.
The Bluezone Model 450 has multiple safety
systems to ensure that you cannot view the
UV bulbs while they are operating.
Do NOT attempt to override the cover switch
to allow the bulbs to operate when the cover
is off.