Blueworks BLH Series, Инструкция по технике безопасности

Страница: 11 / 31

11 | P a g e
Type of Salt to Use
Use evaporated, granular non-iodized salt (sodium chloride). The purer
the salt (at least 99%).
Improve the life and performance of the electrolytic cell. Water softening
salt (also called water conditioner)
Granules are an economical way to buy large amounts of salt. However,
only NaCl salt with a purity of at least 99% can be used. The pill is a
compressed form of evaporated salt and may take longer to dissolve.
Avoid using salt with an anti-caking agent, which may cause
discoloration.
When adding salt to the pool, it’s best to pour the required salt into the
shallow end of the pool and run filter and pump at the same time to
circulate the water and dissolve the salt. Do not pour the salt bag into the
water because the chemicals and ink on the bag will Disturb water
balance. In summer, salt may take 24-48 hours to dissolve, while in
winter it takes longer. Fine grain The salt will dissolve faster than
compressed tablets.
In any swimming pool, do not add salt directly to the skier or directly to
the main drain. Due to the high concentration of salt and reduced pump
flow, this will shut down or shorten the life of the cells.
If the addition is incorrect, please turn off BLH immediately for 24 hours
while the pump and filter are still running. This will help distribute the salt
evenly. The salt display may take up to 24 hours to respond to changes in
salt concentration.