EN-05
first column on screen will be lit up and show input power, at this time, the generator
is in charging state, can not support AC and DC functions. If want to open AC and
DC functions, need to press master power button more than 1 second to turn on the
generator, screen will be all lit up after generator be turned on. After start-up, connect
PV(or charger) to start charging, screen shows input power wattage, at this time, can
open AC and DC functions.
Notice:
1. If Master Power Button is not turned on, AC button and DC button are in off status, no
AC output and DC output.
2. If Master Power Button is turned on, AC button and DC button are still in off status,
no AC output and DC output. Need to turn on AC power button and DC power button
separately.
How to charge the product
Charge with solar power
To charge the product, insert the solar charging cable or AC adapter into the input port
of the product. The display screen would light up and the charging power would be
displayed. But don’t care this the wrong way. The product will not turn on by itself when
being charged. If the product is previously turned off, it will remain turned off unless you
manually turn it on.
Charge with AC power
Insert one end of the adapter into wall outlet and insert the other end to the input port of
the product. Then, the product will be charged and you can monitor the battery status by
checking the battery icon on the LCD screen The product comes with a built-in advanced
control circuit. When the battery is fully charged, it will stop charging itself automatically.
