Bluestone KTB-3453, Руководство пользователя

Страница: 8 / 9

ENGLISH ENGLISH
3 Not recommend to fill with less than “ 0.5L ”, kettle is dry while
operatin.
4 Do not fill water over the “ 1.5L ” level.
SWITCHING ON
SWITCHING OFF
SWITCHING ON AGAIN
1 After filling your kettle with water, place the kettle on the
base unit.
2 Connect plug to power supply and pull down the On/Off switch.
The appliance will begin to operate and the indicator light will
come on.
When the water boils, the kettle will switch off automatically and the
indicator light will go off.
NOTE:
This appliance has a safety system, which automatically switches off the
heater element if the appliance is inadvertently switched when empty,
or if it boils dry. In this case, let the appliance cool down completely,
before filling with water again.
The kettle can be switched on again after cooling down about 30-60
seconds, while the kettle has been switched off automatically.
USING THE APPLIANCE
1 Always remove the plug from the power supply and let the
appliance cool down completely.
2 Clean the outside of the kettle and the base unit with a soft
damp cloth. Then wipe with a dry cloth. Do not use scouring.
3 Descale at regular intervals. Uses a descaling agent, which can be
obtained from specialist shops and follow the instructions given.
CARING AND CLEANING
ENVIRONMENT FRIENDLY DISPOSAL
STORAGE
NOTE
The cord could be winded into the base unit that has a cord storage
compartment.
Do not try to adjust or repair this appliance by yourself.
Please contact with a qualified technician or after sales service center
for repair.
You can help protect the environment!
Please remember to respect the local regulations: hand in
the non-working electrical equipments to appropriate waste
disposal center.
14 15