17
16
* Always check the sieve before use. If you detect any cracks or damage do
not use the appliance and contact the nearest AHA service center or take
the appliance to your dealer.
Place the juice cup or a glass under the spout.
Put the plug in the wall socket.
Wash the fruit and or vegetables and cut them into pieces
that fit onto the feeding tube.
Make sure the juice jug has been placed under the spout.
Switch appliance on.
Put the pre-cut pieces in the feeding tube and gently press
them down towards the rotating filter by means of the
pusher. After the juice flow has stopped, switch the
applance off and wait until the filter has stopped rotating.
Never insert your fingers or an object into the feeding tube.
USAGES
Snap the two clamps onto the lid to clock into place “click”.
Make sure the clamps are clocked into position on either
side of the lid
Slide the pusher into the feeding tube by aligning the
groove in the pusher with the small protrusion on the
inside of feeding tube.
5
6
7
8
1
2
3
NOTE:
INSTRUCTION:
CLEANING
The appliance is easier to clean if you do so
immediately after use
Do not use abrasive cleaning agents, scourers,
acetone, and alcohol… to clean the appliance.
All detachable parts are dishwasher safe
Switch the appliance off, remove the plug from the wall socket and wait
until the filter has stopped rotating
Remove the dirty parts form the motor unit
Disassemble the appliance in the following order:
a
- Remove the pulp container.
b
- Remove the pusher.
c
- Open the clamps.
d
- Remove the lid.
Remove the juice collector together with the filter.
Clean these parts with the cleaning brush in warm water with some
washing up liquid and rinse them under the tap.
Clean motor unit with a damp cloth. Never immerse the motor unit in water
nor rinse it under the tap.
1
2
3
4
5
TIẾNG VIỆT
TIẾNG VIỆT
ENGLISH
ENGLISH
