BlueSky Designs Mount'n Mover, Руководство пользователя

Страница: 26 / 50

Quick Connect Receiver (QCR)
Included Hardware:
(X4) 8-32 x 1/2” Screws
QRP to DP-QCR
(X3) 6-32 x 1/2” Screws
(X3) 3/16” Nylon Spacers
QCR
SALTILLO OFFSET
HARDWARE
Attaching the Quick Connect Receiver (QCR) to the Quick Release Plate (QRP)
QCR
QCR
QRP
Four 8-32 x 1/2”
(Screw X)
QRP
Feed the four 8-32 x 1/2” screws through
the inside of the QRP and into the back of
the QCR. The hole spacing in the QRP allows
adjustment higher or lower depending on
preference
Quick Connect Receiver (QCR)
and the Quick Release Plate (QRP)
and hardware four screw X.
Line up four holes in the QCR with
corresponding holes in the QRP. Note
the grooves in the QCR are facing out.
The red lock on the QRP and the red flag
on the QCR are facing up.
QRP
RED LOCK
RED FLAG
GROOVES
QCR
GROOVES
QCR
higher
QCR
lower
1 2
3
*
*
Four 8-32 x 1/2”
(Screw X)
Page 1
26